BLACK FRIDAY WEEK – ends in ›
Phone: 01305 579049Call me back Mail: info@weymouthtyres.uk
Book Now

Our 12-Step Tyre Fitting Standard

At Weymouth Tyres, fitting a tyre means much more than simply swapping the old one for a new one. Our High-Performance Tyre Fitting Standard is designed to protect your vehicle, achieve accurate wheel balancing and make sure your car leaves our workshop safe and ready for the road.

Your appointment

When you arrive at your booked time, we start work on your vehicle straight away. While we take care of your car, you are welcome to relax in our comfortable customer waiting area, with complimentary water and sweets.

A live camera feed is shown on the monitor, so you can watch your vehicle being worked on throughout the tyre fitting.

Our 12-step tyre fitting procedure

1. Safe and careful vehicle lifting

Your vehicle is lifted only at the manufacturer-approved jacking points. Our lifting equipment uses protective rubber pads to prevent damage to the underside, bodywork and sills.

2. Protected wheel removal

We remove the wheels using protective, sleeved wheel-nut sockets designed to minimise the risk of marking or scratching alloy wheels.

3. Courtesy visual safety check

With the wheel off, we take a quick look at the accessible suspension parts, brake discs and brake pads. If anything looks worn, damaged or unsafe, we will let you know. This is a courtesy visual check, not a full mechanical inspection.

4. Careful tyre removal

Before the old tyre comes off, we protect the rim with specialist silicone guards to help prevent scratches and damage.

5. Thorough wheel preparation

We clean the bead-seating area to remove dirt, corrosion and residue left by the old tyre. If a steel wheel is older or rusty, we clean and seal the surface where needed to help prevent slow air leaks.

6. New valve fitting

A new standard tyre valve is fitted where appropriate. Vehicles with TPMS (tyre pressure sensor) valves are inspected and handled according to the type of sensor fitted.

7. Cleaning for accurate balancing

We remove residue left by old balancing weights and clean the wheel’s mounting surface, so the wheel sits correctly on the balancing machine – and later against your car’s hub.

8. Protected tyre installation

The rim is protected again before the new tyre is carefully fitted with professional tyre-fitting equipment, then inflated to the correct pressure.

9. Valve and air-leak check

We check that the valve is sealing correctly and that the new tyre is holding its pressure.

10. Precision wheel balancing

The complete wheel goes on our wheel-balancing machine, which also uses protective fittings to avoid marking the wheel. We balance it accurately to minimise vibration for a smooth, comfortable drive.

11. Correct wheel installation

The wheel is refitted and the wheel bolts or nuts are tightened to the manufacturer’s specified torque with a calibrated torque wrench.

12. Final tyre-pressure check

Before your car leaves, we check and adjust the pressure in all four tyres to the manufacturer’s recommended settings.

Ready for the road

Only after all 12 steps are complete is your vehicle ready to leave the workshop.

This careful process is why drivers choose Weymouth Tyres for professional tyre fitting and wheel balancing in Weymouth. We take the time to protect your car, prepare every wheel properly and finish every job to the same high standard.

Book online

Free · 2 minutes · no sign-up

Are your tyres safe for winter?
Check them yourself – free.

Grab a 20p coin, follow 3 simple steps and get an instant report for all 4 tyres – tread, uneven wear, tyre age and what to do next. Plus 5% off your tyres after your check.

Start my free tyre check →
  1. Enter your registration
  2. Do the 20p test on each tyre
  3. Get your report instantly
🛞 Free tyre check